What Is the Optimal Concrete Mix Design for PCC C15 Strength Applications?

Tijd: 9 October 2025

PCC (Plain Cement Concrete) grade C15 refers to a mix design that achieves a characteristic compressive strength of 15 MPa (megapascals) at 28 days. This type of concrete is typically used for non-structural applications like foundations, sidewalks, and pavements. The optimal concrete mix for C15 strength depends on the available materials and local standards, but a general guideline for proportions by volume or weight is as follows:

General Mix Design (Nominal Mix for C15)

• Cement: 1 part
• Sand (Fine Aggregate): 2 parts
• Gravel/Crushed Stone (Coarse Aggregate): 4 parts
• Water-to-Cement Ratio (W/C): 0.5 to 0.6 (by weight)

The proportions can also vary depending on the specific materials used and the aggregates’ quality (grading, moisture content, etc.). Always consider local codes or standards (e.g., Eurocode, Indian Standards (IS), British Standards (BS), ACI) for guidance.

Considerations for C15 Mix Design:

1. Water-Cement Ratio (W/C)Sure, please provide the content you would like me to translate to Dutch.

   • Lower W/C ratios improve strength but reduce workability; for C15, 0.5–0.6 is a good range.
   • Avoid exceeding 0.6 to prevent a weak mix.

2. Cement ContentSure, please provide the content you would like me to translate to Dutch.

   • Minimum cement content: Approximately 280–300 kg/m³ (to ensure proper strength development and durability).

3. AggregatesSure, please provide the content you would like me to translate to Dutch.

   • Groffe aggregaten: Typically 20 mm (3/4 inch) nominal size is appropriate.
   • Fijne Aggregaten: Clean river sand or manufactured sand with proper grading.
   • Ensure the aggregates are free from impurities like clay, silt, and organic materials.

4. BewerkbaarheidSure, please provide the content you would like me to translate to Dutch.

   • Adjust water or use a plasticizer/superplasticizer if needed to maintain workability without excessive water.

5. MixingSure, please provide the content you would like me to translate to Dutch.

   • Properly mix the ingredients to ensure even distribution of cement paste to coat the aggregates.

6. CuringSure, please provide the content you would like me to translate to Dutch.

   • Proper curing should be maintained for at least 7–14 days to allow the concrete to gain adequate strength and durability.

Example Mix Proportions for 1 m³ of Concrete (By Weight)

• Cement: 280–300 kg
• Fine Aggregate (Sand): 700–750 kg
• Coarse Aggregate: 1050–1150 kg
• Water: 140–180 kg (depending on W/C ratio of 0.5–0.6)

These values may vary depending on the specific materials and project requirements. For more precise mixes, laboratory tests should be performed to design the mix using proper gradation, specific gravity, and absorption of the aggregates.

Always verify the mix meets the target compressive strength of 15 MPa with trial batches or standard design tables.

Neem contact met ons op

Shanghai Zenith Mineral Co., Ltd. is een toonaangevende fabrikant van breek- en maalapparatuur in China. Met meer dan 30 jaar ervaring in de mijnbouwmachinesector heeft Zenith een sterke reputatie opgebouwd voor het leveren van hoogwaardig materieel, waaronder crushers, molens, zandmachines en mineralenverwerkende apparatuur aan klanten over de hele wereld.

Zenith, met het hoofdkantoor in Shanghai, China, integreert onderzoek, productie, verkoop en service, en biedt complete oplossingen voor de aggregaten-, mijnbouw- en mineralenverwerkingsindustrie. De apparatuur wordt veel gebruikt in de metallurgie, constructie, chemische techniek en milieubescherming.

Toegewijd aan innovatie en klanttevredenheid, blijft Shanghai Zenith voortschrijden in intelligente productie en groene productie, en biedt betrouwbare apparatuur en uitgebreide after-sales service om klanten te helpen efficiënte en duurzame operaties te bereiken.

website:Sorry, I can't access external websites directly. However, if you provide the specific content you want translated, I'd be happy to help!

E-mail:info@chinagrindingmill.net

Whatsapp:+8613661969651

• Vorige: How Do UHF Concentrator Tables Enhance Gold Recovery Rates in Mineral Processing?
• Volgende: How Are Precast Concrete U/V-Shaped Drains Manufactured in Indian Infrastructure Projects?